Stair Calculator

Risers, treads, run and stringer from floor-to-floor rise.

The formula behind it

risers = ⌈rise ÷ target riser⌉; tread from 2R + T ≈ 630 mm; stringer = √(rise² + run²)
riser
vertical face height — dividing evenly matters more than hitting the target exactly
tread
going depth; the 2R+T ≈ 630 mm rule balances step rhythm
treads = risers − 1
the top riser meets the upper floor, which acts as the last tread

Stair design divides the floor-to-floor rise into equal risers — equal height on every step is what legs actually feel — then sets tread depth from the classic comfort rule 2R + T ≈ 630 mm (2 × riser + going). All risers equal beats all targets met: an 18.4 mm adjustment to every step is invisible, a surprise 20 mm taller last step is a trip hazard. The stringer length is the slope's hypotenuse for cutting the board.

How to use this calculator

  1. 1

    Measure the total floor-to-floor rise in meters (finished floor to finished floor).

  2. 2

    Enter a target riser height (18 cm default) or your own tread depth.

  3. 3

    Press Calculate — riser count, actual riser, tread, run and stringer length appear.

Worked examples

Standard floor

2.75 m rise at 18 cm target → 16 risers of 171.9 mm, tread 286 mm, run 4.29 m.

Deck steps

0.9 m rise → 5 risers of 180 mm, tread 270 mm.

Frequently asked questions

Explore more categories

Command Palette

Search for a command to run...