AI Concrete Quantity Assistant
Describe the pour (“patio 4 m × 3 m, 10 cm thick” or “6 footings 0.6 × 0.6 × 1.2 m”). The assistant computes exact geometric volume, adds your waste allowance and reports m³, cubic feet, cubic yards and — with your bag's yield — the bag count. Uses the same verified volume engine as the site's dedicated Concrete Calculator.
Ask in plain words
The AI reads your question and fills in the parameters; a verified calculator engine does every calculation.
AI interpretation is currently switched off — the manual fields below still give you the exact computed result.
How to use the AI Concrete Quantity Assistant
- Pick the pour shape and enter dimensions in meters.
- Set the count for repeated footings/columns.
- Add a waste allowance — 5% formed slabs, 10% irregular excavations.
- Press Calculate for volume in three units plus an optional bag count.
How the calculation works
Slab/footing V = L × W × T (× count); column V = π × (d/2)² × h (× count). Ordered volume = V × (1 + waste%). Conversions: ×35.3146667 to ft³, ×1.30795062 to yd³. Bag count = ceil(ordered liters ÷ bag yield). Identical geometry to the verified Concrete Calculator engine.
Example questions
- “Slab 5m x 4m, 0.1m thick, 5% waste”
- “Round column 0.3 m diameter, 3 m high, 4 of them”
- “Footings 0.6x0.6x1.2 m, 6 pieces, 10% waste”
Related calculators
Prefer doing it yourself? These dedicated calculators run the same verified formulas.
Questions you type are sent to the configured AI provider only to extract parameters; they are not stored. Results are computed locally by deterministic engines and are not advice.